Battery charger NG3 CANBUS English
D01737-01 5
LED Indicator
RED LED shows that battery is in the initial charging phase.
YELLOW LED shows that battery charger has reached 80% of charge.
GREEN LED shows that battery has reached 100% of charge.
Further information can be found in the description of the Charging Curve.
Example: RED LED on with short flashing indicates a constant tension phase.
Display Indicator
(if present)
MODE
END CHARGE
ON CHARGE
Ah
A
t
V
Descrizione
Digital Instrument
Ready Light
Digital adjustment mode
To set the compensation value made by the charger in order to balance the voltage drop on the cables, please follow the procedure
“Compensation setting of the voltage drop on output cables”.
From the beginning the digital instrument shows the following sequence of parameters:
• BATTERY VOLTAGE (two-tone red upper led).
• CURRENT provided by the charger (two-tone red lower led).
• TIME in hours lacking to the end of charge (two-tone green upper led).
• Ah supplied (two-tone green lower led).
• CONNECTED GADGETS (no two-tone led on – only on a MASTER battery charge).
By pressing once the MODE button, the parameters’ sequence stops: display keep on showing last
visualization. By pressing again the MODE button, parameters’ sequence restarts.
Compensation setting of the voltage drop on output cables.
While charging, with a long pressure of MODE Button, you can program voltage cables’ drop. Please execute the following operations while
charger is at maximum current.
1. Gauge the voltage drop at the ends of the output bars of the battery charger (close to the cover).
2. Gauge the voltage on the battery poles.
3. Make the difference between the two values to get the voltage drop compensation.
4. Press shortly the MODE button (ROLL) until reaching the voltage value closest to the required one: it is possible to ROLL parameters
between 0,0V e 1,5V with steps of 0,1V.
5. Press long the MODE button (ENTER) to confirm.
Charging status and current phase of charge of the equipment are indicated through the light station:
PHASE RED LED GREEN LED
Phase 1 On Off
Phase 2 On with short flashing Off
Phase 3 On On with short flashing
Phase 4 On with short flashing On with short flashing
Phase5-Phase6 6 Off On with short flashing
End of charge Off On
80%
END CHARGE
ON CHARGE
MODE
Ah
A
t
V
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals